ABAC S A39B 200 CT3 - Three-phase Belt-driven Air Compressor - 200 L Compressed Air

ABAC A39B 200 CT3 Air Compressor

Main features:

A = "Single stage” cylinder head
39= ABAC "39 series” cylinder head
B = Cooling manifold
200 = Tank capacity in L
C = Wheeled (on wheels)
T = Three-phase motor
3 = Motor power in HP

Electric silenced air compressor equipped with belt drive. This solution offers numerous advantages over a direct drive, the main one being that it allows the cylinder head to be kept at a low speed, which significantly increases the life of the cylinder head and reduces wear. In addition, a low-speed pumping unit also allows for a significant reduction in the operating temperature and noise emissions.

This type of air compressor is particularly suitable for intensive use at both semi-professional and hobby levels, with a special care for the acoustic comfort of work.

Power supply: three-phase 400 V

Power: 3 Hp

The induction motor is characterised by a very long service life and low maintenance requirements.

In fact, this motor is brushless, the brushes being the main component subject to wear in electric motors. The absence of this component grants high durability to the motor.

It is a top product in terms of reliability, low noise, durability, energy efficiency and maintenance.

Air intake flow: 393 L/min
Cylinder head type: twin-cylinder with cast iron cylinders
Suction type: single stage
Lubrication: oil
No. of revolutions: 1050 rpm

The degree of professionalism and more generally the life of the air compressor is largely determined by the number of revolutions per minute of the cylinder head.

A low revolutions number means low wear and longer life of the air compressor. The reduction ratio of the number of revolutions is obtained by the pulleys of different diameter that are assembled to the motor and to the cylinder head respectively.

The ABAC cylinder head is also oil lubricated and has an air output capacity of 393 L/min.

In order to improve the efficiency and performance of the air compressor, the cylinder head is equipped with a side cooling manifold.

The air intake flow cooling system is able to improve the efficiency of the air compressor itself.
When air is pumped from the air compressor cylinder head, it is fed into the tank at a very high temperature. For this reason, the more the air tends to cool, the more the condensate tends to separate and deposit itself in the bottom of the tank.
The feeding of pre-cooled air from the manifolds means that condensate formation is greatly reduced.

Air compressor noise emissions: 91 db.

These air compressors are designed to be kept close to the working area and benefit from the low noise emissions and maximum operator comfort.

This range of products stands out for the excellent combination of noise reduction and easy transportability.

All the advantages of the PRO range are enhanced by low noise emissions comfort.

200 L large tank.

Maximum pressure: 10 bar

The air compressor is equipped with a pressure adjusting knob for the output air pressure that can be checked by means of a pressure gauge located immediately below it, together with a two outlets for a double use.

The pressure switch, located on the opposite side, automatically reactivates the air compressor as soon as the pressure drops below a certain threshold.

It includes a single on/off button, a safety valve, that activates in case of excessive pressure in the tank, and the tank air pressure gauge.

These ABAC air compressors feature a belt drive.

The use of the belt, combined with an induction motor, contributes to the durability of this air compressor, drastically reducing the number of revolutions of the cylinder head, increasing its life and reducing wear.

The protective housing is enveloping and effective. In fact, it has a practical ergonomic shape that allows a better cooling of the cylinder head than other metal protection grids.

Dimensions (L x W x H): 150 x 47 x 111 cm
Weight: 91 kg

Equipped with a sturdy and rubberised front handle for easy grip.

Robust rear wheels.

Pivoting front wheels with braking system.

Drain valve placed under the tank.