AGT 9000 Garden Tiller with Honda GX270 270 cc Engine - 2+1 Reverse Gear Gearbox

The AGT 9000 GX270 garden tiller is a compact medium-sized, handy, powerful and highly-reliable machine.

Equipped with direct multi-disc clutch in oil bath, cast iron gearbox and powered by a HONDA GX270 petrol engine, this garden tiller is the ideal choice for professional heavy-duty work.

Professional series engine which guarantees high reliability and power over time.

This garden tiller weighs 124 Kgwhich is a definite plus as the weight helps with ground penetration.

This model is intended for large-sized land to till or hard ground or with the presence of small stones (where a smaller-sized, more lightweight garden tiller or equipped with a less sturdy transmission, such as belt-driven models would not be able to work as effectively).
Versatile, sturdy and powerful, on medium-compact soils this garden tiller quickly prepares the seedbed by breaking up the top crust, reducing the finely crushed and well aerated soil to soft and ready for cultivation.

It can be used by anyone, even less experienced users.

Also remarkable are the ergonomics of the controls and ease of use coupled with safety at all times for the operator.

Mudguards comply with standard (EN 709) in both thickness, 2 mm, and shape.

Major features:

• Honda engine for professional use.
• The length and position of the steering handles guarantee an easy handling and reduced effort for the operator.
• The lever for the steering handles side adjustment allows to rotate them during work in order to avoid obstacles or to change the machine direction.
• Lever for quick vertical steering handles adjustment.
• Air filter in oil bath for easy maintenance.
• 350 mm diameter tine, sturdy helical blades in heat-treated steel of 6 mm thickness and 40 mm width with side crop protection discs.
• Blade transport system.

Furrower and transport kit with tractor wheels provided on standard equipment, to easily transport the garden tiller.

Honda GX 270 engine: super-professional and SUPER-POWERFUL series, equipped with overhead valve OHV technology.

Features:

The Honda “GX” series is highly professional and was developed for heavy-duty jobs in building and agricultural field for generators, welders etc. It is characterised by great durability and reliability.

The HONDA engines of the GX series stand out as the "TOP-QUALITY ENGINES ON THE MARKET”.

WARNING!

Warning: these machines are tested by the producer before being shipped. Therefore, the engine is already filled with oil at level and with a minimum amount of fuel in the tank. Gearbox oil already at level. Always check the oil levels in accordance with the instruction manual before starting up the machine.Carefully read the instructions manual before starting the unit.

Nominal Power: 9.0 Hp

* The correct term would be "Commercial” Power, meaning the standard definition used until a few years ago by all well-known engine manufacturers. This technical detail is even more widespread and advertised in the leading commercial channels, although it is a matter that it is higher than the actual power.

Rated power: 6.2 Hp

* It corresponds to the real power expressed cutting organ in working phase. This is the power indicated as official in the engine instructions manual.

The gearbox provided features 2+1 gear, which can be engaged via the special lever located on the steering handles.

Main specifications of the gearbox:

• overall size and sturdiness, also visually detectable
• upper gear tempering
• precise gear shifting engagement
• accuracy in gear manufacturing

Focus on the power-take off PTO, which is housed in a sturdy compartment.

PTO diameter without protective housing: 28 mm.

Focus on the vent plug.

The transmission on the lower side on the engine is protected by a sturdy cast iron housing.

The gearbox is made with gears in oil bath with direct drive and clutch lever placed on the shaft.

WARNING!

The engine and transmission are PROVIDED WITHOUT OIL.
It is highly recommended that the lubricating oil is filled up to the correct level.

The steering handles are height adjustable thanks to the special lever made of cast steel placed between them.

All controls are within easy reach and all are located in the handlebars, in compliance with EN 709 standards.

The handlebars are also adjustable in all positions, laterally and vertically.

Operating controls:

- Right lever, which engages the reverse gear (make sure to run the equipment in neutral gear whenever the reverse gear is engaged).

- Left-side red lever, which operates the forward gear.

- Left lower lever: steering handles side adjustment

- Throttle lever

- Gear-engaging lever

Large front bumper: the tiller bumper features a retractable supporting foot.

Focus on the tine stone guard, that can be adjusted in two positions, reversing the front attachments and moving the front attachment upwards as shown in the picture.

ATTENTION: IF YOU POSITION THE STONE GUARD SUPPORTS DIFFERENTLY FROM THOSE SHOWN IN THE PHOTOS, IT WILL NOT BE POSSIBLE TO MOUNT THE TRANSPORT WHEELS!

- Adjustable stake

WARNING!

Carefully check that all cables are correctly adjusted before use, in particular the cable of the right-hand reverse gear lever.

It is also important to check that the earth cable has been fitted correctly and that the red safety lever is working properly (when the lever is released, the garden tiller must switch off immediately!)

Tine: 95 cm, with 6 rows of rotary hoes + side crop protection discs.

Easily adjustable to 65 cm with a short operation.

The cutters are made for professional use, their thickness of 6 mm and width of 4 cm guarantee durability and safety even on difficult terrain.

The working width adjustment can be carried out easily: just insert or remove the most external element and insert the crop protection disc.

This garden tiller can be also operated without the crop protection discs.

In addition, the machine is equipped with tractor wheels, which are useful for moving the garden tiller away from the work area for storage, thus freeing the operator from an additional dedicated means of transport.

Height and side adjustable rear stake.

Furrower attachment provided on standard equipment.

Practical tine holder for easy transport.

Hexagonal hoes shaft diameter: 32 mm.