The Airmec Agritech 1000 tractor PTO driven air compressor is renowned to be a highly professional product.
The large professional twin-cylinder head allows an air flow of 1020 L/min at 11 bar, such power that it guarantees the operation of 2 harvesters, 5 scissors and 1 pneumatic saw.
High-strength reinforced steel frame.
Non-deformable supporting structure made entirely of thick steel.
MADE IN ITALY product
Low-rpm operation for greater fuel economy
The highly professional top-quality CHINOOK head unit is intended for heavy-duty continuous work.
These compressor heads are considered by industry professionals to be the ABSOLUTE BEST ON THE MARKET, due to their outstanding durability. Attention: only the best manufacturers in the sector fit CHINOOK cylinder heads.
The extreme durability of this cylinder head is given by several factors:
Its two-stage head is equipped with two cylinders connected in series where the air is compressed gradually until it reaches the final pressure.
Between the stages, the compressed air is cooled. This improves efficiency, providing higher pressures than those achieved with a single-stage compressor,
Three cooling manifolds
The CHINOOK cylinder head is the only one in its class with three cooling manifolds, two on one side and one on the other, next to the air filter.
This means that there is no other engine-driven air compressor in this category that cools the pumped air like this model.
The air intake flow cooling system is able to improve the efficiency of compressor itself.
The air, when pumped by the compressor head, is deposited in the tank at a very high temperature.
For this reason, the more the air tends to cool, the more the condensate tends to separate and deposit itself in the bottom of the tank (which must therefore be drained at the end of each day with the appropriate valve).
The feeding of pre-cooled air from the manifolds means that condensate formation is greatly reduced.
The absence or reduced presence of humidity in the air supplying the equipment (olive harvesters, pruning shears, pneumatic chainsaws) will drastically reduce the risk of freezing inside the equipment, resulting in more efficient operation and longer life.
Transmission:
Alloy power take-off pulley, large cooling fan made of cast steel.
25 L Tank
No load operating system and maximum pressure control by means of a professional pilot check valve.
Air outlet system
Condensate separation filter with professional aluminium lubricator.
- MADE IN ITALY -
Professional aluminium lubricator
- MADE IN ITALY -
First outlet with female quick coupling, suitable for all uses other than agriculture, which normally do not require oil to be introduced into the air through the lubricator (almost no compressor on the market has this additional outlet).
Air shut-off valve for maintenance operations (such as feeding oil into the lubricator).
Glycerine pressure gauge (not like all those who assemble them dry) which signals the air pressure inside the tank, thus indicating the status of the air stock.
No. 6 Quick output joints
Hose reel support as standard
Second hose reel setting up
Tractor three-point-hitch
The air compressor is shipped already assembled and ready for use.
ATTENTION: machine only, WITHOUT PNEUMATIC EQUIPMENT, Universal joint not included.
To change language, please click on the following abbreviations:
