The Airmec Agritech 540 tractor PTO driven air compressor is renowned to be a highly professional product.
It has a large air production capacity of 540 L/min
High strength reinforced steel frame
Crushproof supporting structure entirely made of heavy-thickness steel
MADE IN ITALY product.
Low-rpm operation for greater fuel economy
The highly professional top-quality CHINOOK head unit is intended for heavy-duty continuous work.
These compressor heads are considered by industry professionals to be the ABSOLUTE BEST ON THE MARKET, due to their outstanding durability. Attention: only the best manufacturers in the sector fit CHINOOK cylinder heads.
The extreme durability of this cylinder head is given by several factors:
Its two-stage header is equipped with a large cooling side manifold in which air is gradually compressed to final pressure.
Between the stages, the compressed air is cooled. This improves efficiency, providing higher pressures than those achieved with a single-stage compressor,
In conclusion, this is one of the best titles on the market in its category to date.
The CHINOOK cylinder head is the only one in its class equipped with a generously sized cooling manifold on the side.
The air intake flow cooling system is able to improve the efficiency of compressor itself.
The air, when pumped by the compressor head, is deposited in the tank at a very high temperature.
For this reason, the more the air tends to cool, the more the condensate tends to separate and deposit itself in the bottom of the tank (which must therefore be drained at the end of each day with the appropriate valve).
The feeding of pre-cooled air from the manifolds means that condensate formation is greatly reduced.
The absence or reduced presence of humidity in the air supplying the equipment (olive harvesters, pruning shears, pneumatic chainsaws) will drastically reduce the risk of freezing inside the equipment, resulting in more efficient operation and longer life.
Transmission:
Large upper cooling pulley made of aluminium alloy.
Lower PTO pulley made of aluminium alloy.
3-belt large-section drive
25 L Tank
Vacuum operating system and maximum pressure control by means of a professional-type isolating valve.
Air outlet system
Condensate separation filter with professional aluminium lubricator.
- MADE IN ITALY -
Professional aluminium lubricator
- MADE IN ITALY -
First outlet with female quick joint, suitable for all the non-agricultural uses, which normally do not require oil to be sprayed into the air via the lubricator (almost no compressor on the market has this additional outlet).
Air shut-off valve for maintenance operations (such as feeding oil into the lubricator).
Glycerine pressure gauge (not like all those who assemble them dry) which signals the air pressure inside the tank thus indicating the status of the air stock.
No. 04 quick output joints.
Standard-supplied support for hose reel
Predisposition for additional hose reel attachment
Tractor three-point-hitch
The air compressor is shipped already assembled and ready for use.
ATTENTION: machine supplied WITHOUT pneumatic equipment.
Cardan joint not included
To change language, please click on the following abbreviations:
