Ama NPS 1370C - Petrol Snowplough - Tracked - Loncin LC185FDS

The Ama NPS 1370C snow blower is designed to work in the most severe weather conditions.

It is suitable for intense working sessions on medium and small-sized areas where the grip on the terrain is fundamental for a good result.

The engine has been especially designed to be mounted on snow blowers for demanding tasks in extreme weather conditions (for example with very low temperatures). It is equipped with electric start that allows to connect the engine directly to the home electrical system. It is not provided with battery since temperatures in which it uses to work would ruin it within very few time. In fact, batteries do not bear quick temperature changes.

2 oil bottles of 1 L each for 4-stroke engine are included as free gifts.

The tracked gear transmission enables simple movements with 6 forward and 2 reverse speeds.

Engine type: Single-cylinder 4-stroke, OHV

With heavy-duty OHV and metal tank.

Air is regulated by means of specific lever. (necessary for the ignition)

Electric start: connect to an electric socket and start the engine by pressing a botton. No need of batteries since they would empty continuously due to the cold temperature.

Also during ignition, the use of the primer pump (red pump) could be necessary. Just push it maximum twice before starting.

Vent screw for a correct stowing during summer, large starting handle, automatic internal decompressor that guarantees very easy and smooth startings without recoils. Winterized engines like this one aren't provided with air filter as, working in environments with low temperatures and snow, this last can create humidity that could freeze damaging the air filter and causing problems to the machine.

Nominal Power: 13 HP
The correct term would be "Commercial” Power, meaning the standard definition used until a few years ago by all well-known engine manufacturers.

* This technical feature is the one indicated in the main sales channels, even if it is higher than the real power of the engine.

Rated power: 10.6 HP (a rotation speed of 2800 rpm)
It corresponds to the real power of the crankshaft. This is the power indicated as official in the engine instructions manual.

* This technical feature may vary from a an engine model to another according to the rotation speed provided by the manufacturer.

Motor NOT PROVIDED WITH OIL.
Read the instructions manual carefully before using.

Auger screw housing width of 70 cm and height of 55 cm.

The professional auger unit provided has an advanced and toothed steel auger unit. This structure is best suited to churn up even the thickest snow.

The shear bolts protect the auger gearbox.

Therefore, they react to stones or other obstacles by automatically unhooked from the gearbox.

The machine is provided with a two-stage system

The snow is fed into the housing by the ribbon auger and is then discharged away through the discharge chute by a high-speed fan impeller.

The discharge chute is adjustable by means of a spiral connected to a lever located next to the main controls. Just turn the lever to rotate the chute towards the desired position.

Left-oriented discharge chute

Right-oriented discharge chute

Deflector located completely at the top for the maximum expulsion distance

The discharge chute is equipped with safety grid.

Panel is well-provided and easy to use. It includes the main functions of the machine.

Right gear shift lever:
6 forward speed
2 reverse speed

Left lever: adjusts the height of the chute.

Upper lever on the right side: it stops the forward and the reverse movement of the machine, independently from the selected speed. For safety reasons, the machine will stop automatically releasing the lever. The small lever on the handle makes the machine go left.

Upper lever on the left side: it controls the auger screw and the impeller fan (it controls both simultaneously). The small lever on the handle makes the machine go right.

Controls to switch on lights and heat handles.

Clean-out tool. If the discharge chute is clogged, use the clean-out tool.

Traditional tracks with 2 professional rollers. Excellent grip on any type of terrain, on drit roads and slopes.

The handlebars are foldable so as to take up little space during stowing.

3 working positions to takle each situation.

Positions are adjustable by means of a lever located at the right of the engine.

Starter: manual and electric
Speed: 6 forward speed, 2 reverse speed
Working size: 70 cm width, 55 cm height
Discharge chute rotation: 180°
Weight: 150 kg

2 bottles of 600 ml oil each as free items. Excellent performances with a very good quality-price ratio. Pre-assembled machine in a shock-resistant packaging.