Benassi MC2300C - Petrol Two-wheel Tractor - 1Hwasdan H170 - 5.5HP

Self-propelled two wheel tractor powered by a 4-stroke engine and driven by large treaded tractor wheels. The wheels are attached to an gear transmission with gears in oil bath.

The 48 cm tiller accessory (supplied as standard) is equipped with 4 elements with 4 hoes each (16 hoes in total).

The two-wheel tractor is driven by a 2-gear gearbox (1 forward + 1 reverse).

Multi tool machine with quick hitch and reversible steering handles, that provides for the possible application of other accessories on request to exploit the full potential of the machine.

BENASSI two-wheel tractors are Made in Italy products, a guarantee of reliability, quality of construction and materials.

Two-wheel tractors are intended for the processing of soft not-stony soils. They do not dig very deep into the ground, but have the ability to break up the soil very finely, more than any garden tiller. For this reason, they are specifically designed for working in vegetable gardens in all types of crops, or, in any case, on soft soils that have already been ploughed and frequently tilled.

On the other hand, in case of particularly hard (or even never worked) or fairly stony ground, or with sloping terrain, we recommend to move towards a garden tiller, which is better suited to working in these conditions.

The machine has been upgraded with a new, even more sturdy tiller!

Thanks to the new construction profile, the machine structure is even more resistant.

Sickle bar with dual-blade action which allows removing overgrown grass and weeds.

Adjustable back furrower

New generation 4-stroke engine with overhead valve "OHV” technology.

Petrol engine that is specifically designed to ensure high performances and it is suitable for works that require high reliability and durability, thanks to its remarkable 170 cc of cubic capacity.

Main features:

Focus on the recoil start.

Focus on the air filter

WARNING.
The engine is provided without oil. Bring the oil to the right level before first ignition.

Remember that it is always a good idea to:
1) check the engine oil level
2) put oil in the filter because it is not present (in case of filter in oil bath)
3) carefully read the instructions manual before carrying out any oil check and topping up operation (the manufacturer can modify the supply modalities specified in the two upper points without any prior notice).

The two-wheel tractor is driven by a 2-gear gearbox (1 forward + 1 reverse).

They can be engaged by means of the lever placed under the steering handles.

The gearbox and transmission are among the parts most prone to failure and wear.

This is why in this machine these components are entirely made of gears in oil bath and not equipped with drive belt, thus giving the equipment very high strength and durability.

Very sturdy and reliable.

Focus on the steering handles where all the main controls are placed.

Focus on the

• gearbox and power take-off engagement levers.
• Silver lever: wheels unlocking lever
• Red lever: engine stop lever
• Silver lever: Clutch lever

Focus on the height adjustment of the steering handles.

Reversible or side-adjustable steering handles .

Focus on the fixing and rotation system of the steering handles support by means of the special locking lever.

Throttle lever

Tiller working width: 48 cm

External hood made of sheet steel.

Tiller equipped with 4 elements, each with 4 hoes

Tiller diameter: 26 cm

The stake can be adjusted in various positions, thus determining the working depth of the tiller(remember that all the two-wheel tractors on the market tend to grind the soil very finely, but they carry out fairly superficial work, i.e. they feature a medium-low working depth in the soil).

Focus of the quick hitch between the tiller and the machine body.

The tiller engagement and disengagement lever (red lever at the top) enables the transmission to be activated and deactivated only when necessary. This allows to move the machine using self-propulsion with the tiller stationary.

Heavy-duty large-sized treaded pneumatic wheels 13.5.00-6"

Equipped with locking/unlocking system on the steering handles. In this way, the wheels go into neutral or regain traction.