Name: BlackStone PD530 - 2-stroke mixture auger - Tips included
Brand: BlackStone
Price: 291.95 EUR
Availability: InStock
Rating: 4.46 (169 reviews)

Description

Blackstone PD530 2-Stroke Post Hole Borer

The Blackstone PD530 post hole borer is intended for a large variety of works, in both the construction and the agricultural field.

Earth augers are used to create holes in the ground, more or less deep, depending on the operator’s needs, for planting fruit trees, stacking concrete poles or for making fence basis.

The maximum drill depth that can be reached with the auger bits of these post hole borers is 75 cm.

Among the main features of this earth auger, the most remarkable one is the very high power/weight ratio.

It is powered by a 2-stroke engine with a cubic capacity of 52 cc that can develop a power of 1.45 kW (2 Hp) and features a cast transmission with gears lubricated in grease bath.

In addition to the auger bits provided, there are several types of bits and an bit extension that enables to reach greater depths.

AUGER BITS INCLUDED:

- Ø 100 mm

- Ø 150 mm

- Ø 200 mm

BlackStone PD530 - 2-stroke mixture auger - Tips included

The engine

This machine mounts a 2-stroke air-cooled single cylinder engine.

Main features:

Cubic capacity: 52 cc
Power: 1.45 kW (2 Hp)
Revolutions per minute: 7500 rpm
Tank capacity: 1.25 L
Fuel: fuel-oil mix

Focus on the recoil start system;

Focus on the primer pump;

Focus on the air choke lever.

Transmission

The Blackstone post hole borer mounts a large sturdy cast gearbox with internal gears in high-impact hardened steel lubricated in grease bath.

This aspect is very important when purchasing a post hole digger, as the gearbox component is continuously subjected to high stresses and its correct functioning determines the durability and reliability of the entire machine.

The gearbox reduces the engine rpm to a 1:40 ratio by running the auger tip up to 160 rpm

Additional features

The extraction process of the auger from the ground is really easy since this model is one of the lightest post hole borers on the market: only 12.5 Kg.

User-friendly controls located on the handle.

Speed limiter valve.

All the controls are placed on the machine handle.

To replace the auger bit or add the extension, just remove the safety device, insert the new component and put the safety device back on.

Auger bits and extensions available

Hardened steel auger with new optimized profile. Reduced recoils when the post hole borer touches an object while drilling.

The auger bits included in the machine are:

- Ø 100 mm

- Ø 150 mm

- Ø 200 mm

The auger bits can be purchased as accessories from the correlated products section. The following range of auger bits and accessories can be mounted on this model of post hole borer:

- Ø 60 mm

- Ø 150 mm

- auger bit extension