Bluebird T170 HO - 4-stroke Petrol-powered Auger - Honda GCVx 170 - Bit not included

The Bluebird T170 HO post hole borer with Honda GCVx 170 engine is a heavy-duty tool suitable for a large variety of works in both the construction and agricultural field. Earth augers are a great and effortless solution to plant fruit trees, make fence bases or bore fence posts, stack concrete poles in the vineyard and for many other applications.

2 or more users are needed for machine operation.

Equipped with a 4-stroke Honda GCVx 170 engine capable of reaching a power of 4.4 Hp, it features an idle lever and an inverter, and mounts the sturdiest gearbox on the market entirely made in Italy by Blue Bird Industries.

Several types of auger bits available from Ø 10 cm up to 40 cm

WARNING!

AUGER BITS NOT INCLUDED, TO BE PURCHASED SEPARATELY IN THE ACCESSORIES SECTION!

The Honda GCVX 170 engine guarantees high performance and it is suitable for works where high reliability and durability are required, thanks to its large cubic capacity of 166 cc.

Main features:

New generation 4-stroke engine with overhead valve shaft OHV technology, transistorised ignition, starter with automatic decompression, etc..).
Designed to offer high reliability and performance, the Honda GCVX series has established itself as one of the best engines on the market for this type of machines.

Easy recoil start thanks to the automatic fuel priming system.

Focus on the air filter.

WARNING

The engine is PROVIDED WITHOUT OIL.
Please carefully read the instructions manual before starting the unit.

Nominal Power: 5.5 Hp
The correct term would be "Commercial” Power, meaning the standard definition used until a few years ago by all well-known engine manufacturers.

* This technical feature is the one indicated in the main sales channels, even if it is higher than the real power of the engine.

Rated power: 4.8 Hp (at 3000 rpm)
It refers to the real power of the engine. This is the power indicated as official in the engine instructions manual.

* This technical feature may vary from an engine model to another according to the rotation speed provided by the manufacturer.

WARNING!

AUGER BITS NOT INCLUDED, TO BE PURCHASED SEPARATELY IN THE ACCESSORIES SECTION!

The gearbox mounted on this earth auger is certainly among the most sturdy and reliable on the market.

The carter is in G-AI Cu 4.5 UNI 3044 aluminium. The gearbox comes with supported in case-hardened tempered gears entirely made of steel.

The transmission, which is also made of high-impact in case-hardened and tempered steel gears, is lubricated in grease bath.

This heavy-duty post hole borer is equipped with a idle gear lever, inverter lever and auger bits quick connection.

The inverter allows for quick extraction of the drill from the ground, without exerting excessive effort in lifting it from the ground after drilling.

WARNING!

AUGER BITS NOT INCLUDED, TO BE PURCHASED SEPARATELY IN THE ACCESSORIES SECTION!

Extremely easy to use, in fact all the controls are located on a single handle.

It features a sturdy round tubular frame to be easily operated by more than one user.

Focus on the idle gear lever and inverter lever

The weight of the tool without the auger bits is about 29 Kg.

WARNING!

AUGER BITS NOT INCLUDED, TO BE PURCHASED SEPARATELY IN THE ACCESSORIES SECTION!

Hardened steel auger with new optimised profile. Reduced recoils when the post hole borer touches an object while drilling.

The auger bits are made of very thick steel, while the pilot bit and the blade are made of hardened C40 steel and are very easy to replace.

Attention: auger bits not included! The auger bits can be purchased as accessories from the correlated products section.

SINGLE-START AUGERS:
- Ø 100x700 mm
- Ø 150x700 mm
- Ø 100x1000 mm
- Ø 150x1000 mm

DOUBLE-START AUGERS:
- Ø 200x700 mm
- Ø 250x700 mm
- Ø 300x700 mm
- Ø 350x700 mm
- Ø 400x700 mm
- Ø 200x1000 mm
- Ø 250x1000 mm
- Ø 300x1000 mm
- Ø 350x1000 mm
- Ø 400x1000 mm

WARNING!

AUGER BITS NOT INCLUDED, TO BE PURCHASED SEPARATELY IN THE ACCESSORIES SECTION!