BullMach BM-61 LTE - Petrol Snowplough - Tracked - Loncin H200

Designed for removing snow from outdoor areas in every condition and on sloping terrain.

The BullMach BM-61 LTE tracked petrol snow blower is powered by a powerful 196 cc Loncin H200 engine with a rated power of 6.5 HP.

Its track rollers and different working positions make this snow thrower very stable and efficient. In fact, it can be set with the cutter tilted upwards to ease movement when not shredding snow.

Optimum grip even on wet or sloping terrain.

The BM-61 LTE is equipped with a 61x51cm auger with an optimised steel spiral shape and serrated edge. This auger shreds the snow discharging it even metres away via the adjustable and swivelling 190° discharge chute made of high-quality steel.

Thanks to the LED headlight it is possible to operate even in foggy weather, mist or low light.

The machine is also provided with the following features:

• Electric and recoil starting system in case of emergencies.
• Easy manoeuvring thanks to the mechanical 6+2 speed gearbox
• Furthermore, it is also equipped with a practical unclogging shovel, useful for emptying the chimney in case of clogging (chimney equipped with protective grid).

The snow thrower is powered by a 196 cc Loncin H200 4-stroke OHV engine equipped with aluminium cylinder.

Features:

WARNING
The engine is PROVIDED WITHOUT OIL. Make sure to carefully read the instructions manual before starting the unit.

Nominal Power: The correct term would be "Commercial” Power, meaning the standard definition used until a few years ago by all well-known engine manufacturers.

* This technical feature is the one indicated in the main sales channels, even if it is higher than the real power of the engine.

Rated power: 5.5 HP (a rotation speed of 3600 rpm)
It refers to the real power of the engine. This is the power indicated as official in the engine instructions manual.

* This technical feature may vary from a an engine model to another according to the rotation speed provided by the manufacturer.

Focus on the spark plug

This snow thrower is equipped with enamelled steel snow discharge chute that be turned by means of a lever on the side of the handlebar.

190° adjustable discharging chute: it rotates 95° to either side of the travel direction.

Focus on the fully left-facing discharge chute

Focus on the fully right-facing discharge chute

Deflector completely opened to reach the max. discharging distance.

Deflector completely closed.

The discharge chute is also equipped with a protective safety grid.

The auger compartment is 61 cm wide and 51 cm high.

The snow thrower is a professional tool equipped with a steel spiral with optimised profile and serrated edge. This special design makes it suitable for crushing even the hardest snow.

The safety bolts protect the gearbox. The safety bolts protect the gearbox from damage, as they are specially designed to give way if the blade runs into rocks or obstacles.

Two-stage system

The snow is efficiently conveyed into the machine through the auger and is then discharged away through the proper chute by an internal high-speed centrifugal fan, which is equipped with reinforcement bars.

Aluminium right angle gearbox with grease-bath steel internal gears.

Adjustable plastic side skids that allow this snow thrower to operate on all types of terrain, from smooth to uneven ones (by raising the working height through the skids). It can also operate on gravel surfaces.
Plastic allows the machine to operate on special terrain without scratching it.

The snow thrower control panel is easy, user-friendly and very practical.

Lever switch to enable/disable the LED spotlight.

Gear lever on the right: 6 forward gears 2 reverse gears

Lever on top of the right handle: enables and disables the forward and reverse gears (whatever speed is selected on the gearbox). Releasing this lever stops the machine instantly, for safety reasons.

Lever on top of the left handle: enables and disables both the auger and the high-speed fan (enables and disables both stages simultaneously).

Discharging chute direction: adjustable by means the proper lever.

Tool for unclogging.
If the discharging chute clogs it can be easily cleared with the proper tool.

In fact, it can be set with the cutter tilted upwards to ease movement when not shredding snow.

Convenient LED spotlight useful while operating in low-light conditions.