BullMach FALX 700 MY24 - Professional knife flail mower

The BullMach Falx 700 MY 24 petrol blades flail mower is an excellent choice for those looking for power and reliability in gardening and agricultural work.

Equipped with a WM300F-2 engine, it ensures power and reliability.

This flail mower is designed to tackle even the toughest weeds thanks to its efficient and robust capacity.

The main features of the BullMach Falx 700 MY 24 include a 70 cm cutting width, which allows large areas to be covered in less time.

Its minimum cutting height is 8 mm, allowing a precise finish on even the most difficult soils.

With its significant total weight, this model ensures stability and sturdiness during use, reducing vibrations and improving operator comfort.

The belt clutch system ensures optimal control of the machine, while the rotational speed of 3,000 rpm provides efficient and even shredding.

The BullMach Falx 700 MY 24 is equipped with three forward gears, and one reverse gear, providing great versatility and ease of manoeuvre in different working conditions.

The 36 standard blades ensure complete shredding of the plants, making the soil ready for further tillage.

With neutral gear on, it is possible to move the machine without starting the engine.

Distinctive features:

• Large cutting width: 70 cm.
• Cutting height: Minimum 10 mm, maximum 50mm
• Clutch system: Belt tensioner.
• Rotational speed: 3000 rpm.
• Gears: 3 forward, 1 reverse.
• Blades: 36 standard knives.

This machine features an excellent engine, requiring minimal maintenance while providing excellent power and durability.

Features:

• Engine type single-cylinder 4-stroke-OHV
• Cylinder type Aluminium
• Displacement 302 cm³
• Max. revs 3600 rpm
• Tank capacity 6.0 litres
• Oil tank capacity: 1.1 litres

Detail of the oil bath air filter.

Nominal Power: 10 HP
The correct term would be 'Commercial' power, meaning the standard definition officially used until a few years ago by all well-known engine manufacturers.

* This figure is the one most widely used and publicised in the main sales channels, even if it is higher than the actual power.

Effective power: 8.5 HP
It refers to the actual power expressed at the drive shaft. This is the figure listed as official in the engine manufacturer's instruction manual or technical data.

* This is a figure that can vary for the same engine model depending on the rpm the equipment manufacturer has decided to have the engine applied

THE MACHINE IS SHIPPED WITHOUT OIL.

Read the instruction manual carefully before starting the engine.

4-speed oil-bath gearbox: 3 forward gears with 1 reverse.

The gearbox is very sturdy and reliable.

End transmission to the flail mower rotor via a drive belt protected by a robust casing.

Detail of the dashboard with gear switch.

Flail mower deck made from extra thick steel plate.

Sturdy steel rotor with 36 Y-shaped knives. They give this machine unrivalled effectiveness on all types of tasks (grass but also brushwood, thorn bushes, pruning, up to 2.5 cm in diameter)

Working width: 70 cm

Detail of the knives and their sturdy supports

Cutting height adjustment via hand-wheel

Detail of the robust front rubber protection strip, fitted on a pivoting band.

The cutting deck is also equipped with an additional protection for the operator fitted to the top of the deck. This safety guard ensures maximum safety in use.

Right lever: this is the feed clutch lever, it activates and deactivates the feed, whatever speed is selected on the gearbox (both forward and reverse). Releasing this lever causes the machine to stop instantly, for safety reasons.

Left lever: activates and deactivates the knife rotor (i.e. the grinding function)

the levers under the two clutches are used to activate assisted steering

Gear switch

Control handlebar adjustment: can be set to 4 different heights

Cutting height adjustment: twist the lever to raise or lower the cutting deck.

Tilting steel front fairing.

It tends to rise automatically should the machine have to deal with large masses of particularly tall and thick grass, to facilitate its entry under the cutter deck for efficient and instant shredding.

Swivelling front wheels.

TRACTOR pneumatic wheels for large-scale agriculture: 4.00-8

Stone guard above the flail mower deck.