Name: BullMach GEO 50 L - Petrol Two-wheel Tractor - Loncin C200F - 6.5HP
Brand: BullMach
SKU: K603655
Price: 589.33 EUR
Availability: InStock
Rating: 4.5 (38 reviews)

Description

BullMach GEO 50 L Petrol Two Wheel Tractor

Self-propelled two wheel tractor with 4-stroke petrol engine, driven by two large tractor wheels.

The machine is equipped with a reverse clutch system, safeguarding the operator from possible accidents.

This model is powered by a Loncin 196 engine (6.5 HP).

Two wheel tractors are intended for working on soft, non-stony ground. Two wheel tractors do not go very deep while working. Anyway, they have the ability to break up the soil very finely, more than the results achieved by any garden tiller. Therefore, two-wheel tractors are mostly intended for working in vegetable gardens for all kinds of crops planted there. So, in any case, soft soils, already tilled, and frequently tilled.

On the other hand, in case you have particularly hard (or even never worked) or fairly stony ground, or with sloping terrain, we recommend you to address your choice on a rotary tiller, which is better suited to working in these conditions.

The 50 cm tiller attachment is equipped with 4 elements with 3 hoes each (12 hoes in total).

WARNING!

Engine and transmission provided without oil. Make sure to add oil before the first use.

BullMach GEO 50 L - Petrol Two-wheel Tractor - Loncin C200F - 6.5HP

Loncin G200F engine 196 cc - 6.5 HP

Technical features:

Engine type

4-Stroke, single cylinder

Cylinder type:

Aluminium

Cubic Capacity:

196 cmÂ³

Fuel:

Petrol

Starting:

Recoil starter

Focus on the air filter in oil bath.

Fuel Tank: 3.6 L

WARNING!

The engine is PROVIDED WITHOUT OIL.
Make sure to carefully read the instructions manual before starting the unit.

Nominal Power: 6.5 Hp

The correct term would be "Commercial” Power, meaning the standard definition used until a few years ago by all well-known engine manufacturers. This technical feature is the one indicated in the main sales channels, even if it is higher than the real power of the engine.

Rated power: 5 Hp

*It refers to the real power of the engine. This is the power indicated as official in the manual or in the technical data of the engine manufacturer.

2 Speed gear shifting system (1+1)

This machine is equipped with a 2-speed gearbox that can be selected using the 2 levers on the handlebars.

The black lever is used to activate the tiller motion and the frontal movement of the two-wheel tractor.

The red lever operates the reverse gear without activating the movement of the hoes. This will ensure to carry out manoeuvres in complete safety..

Sturdy and reliable central transmission.

Oil filler cap

It is possible to move the machine even with the engine switched off and without operating the cutter by simply disconnecting the wheel stop pin, thus allowing the wheel to turn freely on the hub.

Transmission oil already at level

Rear tiller 50 cm with quick fitting system

The tiller has a working width of 500 mm and it consists of 4 elements with 3 hoes each.

These hoes are oversized (very large in size). They feature a special shape that allows them to enter the soil gradually, so that the working process can be also carried out on firm and somewhat more compact soils.

The outer bonnet is made of painted sheet steel and it is fitted with a very large accident prevention guard.

The side threads are height-adjustable so that the working depth can be adjusted in any situation.

The machineries manufactured by most competitors do not have this feature.

The hoes have a working diameter of 28 cm.

Focus on the spur, equipped with various positions, which determines the working depth of the tiller(remember that all self-propelled cultivators on the market tend to break up the soil very finely, but by their nature they carry out fairly superficial work, i.e. they have a more limited working penetration into the soil than rotary tillers)

Handlebars and controls

Focus on the steering handles (handlebars) where all the main controls are placed.

Levers with black knob: gear lever and PTO shaft lever

Red lever: (clutch control lever) operates the machine, before operating the lever press the red safety button to unlock the handle.

Throttle lever

ON/OFF switch