Eurosystems P70 EVO - Petrol Two-wheel Tractor - Brigs&Stratton 850iS - Electric Start

Self-propelled two wheel tractor powered by a 4-stroke engine and driven by large treaded tractor wheels. The wheels are attached to an gear transmission with gears in oil bath.

The 55 cm tiller attachment (supplied as standard) features 4 elements with 4 hoes each (16 hoes in total).

The two-wheel tractor is driven by a gearbox with 5 gears, of only 3 of which can be engaged to activate the functions of the machine (2 forward gears + 1 reverse gear), specifically the slower gears that are more suitable for specific use as a two-wheel tractor for tilling the soil.

The machine is multi tool. i.e. it provides for the possible application of other accessories on request, which allow to use all 5 gears of the two-wheel tractor.

This type of machines is designed for working on soft, non-stony ground. They do not dig very deep into the ground, but they are capable of breaking up the soil very finely, more than any garden tiller on the market. For this reason, they are specifically designed for working in vegetable gardens in all types of crops, or, in any case, on soft soils that have already been ploughed and frequently tilled.

On the other hand, in case of particularly hard (or even never worked) or fairly stony ground, or with sloping terrain, we recommend to move toards a garden tiller, which is better suited to working in these soil conditions.

Power sweeper
for cleaning:
-yards,
-green areas,
-roads,
-squares

Snow plough
for cleaning up fallen snow in squares, small paths, courtyards, etc.

Sickle bar
with dual-blade action for cutting wild or unkempt grass in plots of land

Garden vacuum
for quickly collecting dry leaves in yards, driveways, courtyards, etc.

Snow blower
for clearing roads, driveways, yards of large quantities of fallen snow, disposing of it on the sides thanks to the discharge chute.

Rough cut mower cutting deck
for the removal of weeds or uncultivated grass.

The machine mounts the brand new Briggs&Stratton 850iS Series™ InStart single-cylinder engine with electric start.

• InStart iS (Instant Starting Technology) is an innovative system that allows the engine to be started with a single touch, with no starter rope, no carburettor primer and no air control lever.

Features:

The 850iS Series™ InStart engines are among the best and most innovative engines for garden machinery manufactured by Briggs&Stratton.

They of course share all the same features in terms of power, performance and reliability of their predecessors, plus the most innovative and easiest start ever, in addition to more torque, lower noise emissions and vibrations compared to competing engine in the same category.

Focus on the battery and battery charger supplied.

Nominal Power: 6.5 Hp
The correct term would be "Commercial” Power, meaning the standard definition used until a few years ago by all well-known engine manufacturers.

* This technical feature is the one indicated in the main sales channels, even if it is higher than the real power of the engine.

Rated power: 5.2 Hp (at 3600 rpm)
It refers to the real power of the engine. This is the power indicated as official in the engine instructions manual.

* This technical feature may vary from an engine model to another according to the rotation speed provided by the manufacturer.

The InStart by Briggs & Stratton electric starting device allows the powerful engine to be turned on by simply pressing a button.

This starter system implements cutting-edge lithium battery technology fitted directly to the petrol engine. The battery recharges in 10 minutes to ensure more than 10 starts, or in 60 minutes for more than 50 starts. Once the battery is inserted, the engine is turned on by simply pressing a button

Place the battery in its proper compartment on top of the engine 1 2

Then press the start button to turn the engine on.

No need to check the carburettor primer or the air control lever!

Lithium battery technology ensures simple, immediate and repeated start-up, with no need to recharge after each use. With a simple push of a button, InStart provides the easiest start-up ever and eliminates the need for traditional recoil start operation.

The two-wheel tractor is driven by a gearbox with 5 gears, of which only 3 can be engaged for tilling operations (2 forward gears + 1 reverse gear) and precisely those slower gears are more suitable for specific use as a two-wheel tractor for tilling the soil.

The 5-gear gearbox (3+2) can be used with the other accessories attached to the machine.

They can be selected by means of the proper lever placed under the steering handles.

Central transmission with aluminium housing and internal steel gears in oil bath. Very sturdy and reliable.

Focus on the steering handles where all the main controls are placed.

Lower lever with black knob: gear shifting lever.

Red lever: milling cutter engagement/disengagement.

Silver lever: forward and reverse gear engagement/disengagement (whatever the gear set by the operator).

Focus on the steering handles height adjustment.

The steering handles are reversible and side-adjustable.

Focus on the steering handles fixing and rotation system through the proper lever.

Throttle lever

Tiller working width: 55 cm

External hood made of sheet steel.

Tiller equipped with 4 elements, each with 4 hoes

Tiller diameter: 32 cm

The stake can be adjusted in various positions, thus determining the working depth of the tiller(remember that all the two-wheel tractors on the market tend to grind the soil very finely, but they carry out fairly superficial work, i.e. they feature a medium-low working depth in the soil).

Final belt drive between the tiller and the machine body (protected by the black housing in the photo).

This will ensure longer life to the machine. In fact, the belt performs a function similar to that of a clutch (it can slip in the event of some impact from tiller’s hoes, often preventing the various components from being damaged.
However, we do not recommend bumping the machine and working on stony ground.

Professional large-sized pneumatic treaded drive wheels 15"x6.00-6

Equipped with a locking/unlocking system that can be activated and deactivated by opening the locking pin. In this way, the wheels go into neutral or regain traction.