GeoTech GS150EL - Petrol garden shredder - Loncin gasoline engine 15 HP - electric start

The Geotech GS150E garden shredder is intended for crushing dung and twigs to an easy-to-handle overall size suitable for composting. Shredding operations also allow reducing the material decomposing time.

The Geotech GS150EL petrol wood chipper is provided with dual hopper.

DUAL HOPPER:

The main hopper is mostly intended for large twigs as well as green material or small-sized branches up to 10 mm diameter. It is large and allows processing high volumes and quantities of material simultaneously.
* It is not recommended to shred grass and leaves exclusively without processing the material with twigs and small branches as the shredder is not provided with self-feeding system.

The second hopper of the Geotech GS150E wood chipper can be only used for shredding branches up to 10 cm maximum diameter.

The shredder is provided with towing hook.

Machine body fully made of steel. No plastic has been used.

Warning: Like all wood chippers and garden shredders, it is not suited for shredding grass, leaves, pine needles, etc. (it is intended to shred branches, but it can also grind leaves, needles and others)

Garden shredders intended use:
- The wood chipper must grind only green branches and not dried ones (which would limit its shredding capacity and lead to quick deterioration of the blades);
- The branches must be preferably long, smooth and not knobby (otherwise the cutting diameter would be reduced);
- The branch cutting diameter indicated is the maximum, so it is advised not to shred larger branches. In this case it would be better to purchase a shredder with a larger branch cutting diameter;
- The cutting diameter can vary according to the amounts of wood (e.g: oak, olive, plum and peach are hardwood and can reduce the cutting capacity of the wood chipper);

Features:

Latest-technology Loncin four-stroke petrol engine with overhead valve "OHV".

The front handle also acts as a protection for the engine as it covers the side of the machine that reaches the highest temperature.

Nominal power: 15 Hp

The correct term would be "Commercial” Power, meaning the standard definition used until a few years ago by all well-known engine manufacturers.

* This technical feature is the one indicated in the main sales channels, even if it is higher than the real power of the engine.

Rated power: 13 Hp

It refers to the real power of the engine. This is the power indicated as official in the engine instructions manual.

* This technical feature may vary from a an engine model to another according to the rotation speed provided by the manufacturer.

The engine is PROVIDED WITHOUT OIL.
Please carefully read the instructions manual before starting the unit.

The machine is provided with centrifugal clutch. It is important to let the engine running at high speed in order to ensure a proper functioning.

The only one of the category with intermediate belt drive transmission.

This feature gives high sturdiness to the unit, protecting both the engine and all the shredding system from every possible internal hit or kickback.

Higher durability over time compared to the standard system of all the manufacturers of petrol-powered machineries, as the transmission is directly connected to the shredding cutting system.

The shredder is equipped with a dual-hopper system.

The main hopper is mostly intended for large branches as well as for shredding small-sized branches (up to Max. 10 mm diameter) and green material.

The hopper transverse opening is 33 cm: this important features allows easily entering large volumes of material into the hopper simultaneously.

The hopper (SPECIFIC for branch processing) with larger diameter allows processing branches up to 10 cm diameter.

The hopper intended for shredding branches has been specifically designed to enhance the Operator’s safety thanks to its improved length as it keeps the user far from the cutting blades of the shredder.

Excellent cutting system, resulting in high performance and productivity: 2 blades + 8 hammers + 8 knives

Large and highly-thick 2 shredding blades mounted on a large spinning steel plate. They pre-shred the wood into the hopper reducing it in coarse wood chips.

No. 8 triangle-shaped hammers, high-speed rotating hammers made of hardened steel. They perform a centrifugal operation, reducing the material into smaller wood chips.

No. 8 rectangular-shaped knives made of steel and rotating at high speed. With their centrifuge operation they further shred the wood chips already shredded by the 2 blades, reducing them into smaller pieces.

Equipped with a sieve that retains the wood chips until finely shredded.

The protective grid prevents access to the inside of the machine, which can be easily removed for cleaning and maintenance.

This shredder model is almost the only machinery with the discharge opening provided with grid, which allows that the shredded material will be exclusively discharged once perfectly shredded by the hammers.

Electric start with battery and battery charger provided on standard equipment.

3 comfortable handles to easily transport your wood chipper: front handle, rear upper handle and lower handle, which result to be extremely useful to store the unit.

Large pneumatic wheels.

Towing hook to easily move the shredder.

New reinforced support leg with anti-vibration and non-slip rubbers.