GeoTech-Pro STP1176 WEBS - Petrol Snowplough - B&S 1450 Snow

GeoTech STP 1176 WEBS in short:

ST: Snow Thrower.
P: stands for GeoTech Pro.
11: 11 Hp rated output.
76: 76 cm standard auger width.
W: means that the machine is equipped with Wheels.
E: stands for Electric.
BS: stands for Briggs&Stratton, which is the motor's brand.

GeoTech STP 1176 WEBS snow thrower is suited to work on irregular surfaces where traction and adherence are essential in order to guarantee good performance.

It is equipped with tractor wheels for optimum traction and adherence.

As the snow thrower has an electric start, is possible to connect it to your home electric line. It is not supplied with batteries as the low temperatures can quickly damage them. Batteries suffer jumps in temperature.

The Briggs&Stratton engine provided is guarantee of sturdiness, long life time and good performance.

Briggs & Stratton 1450 Snow Series has been specifically designed and manufactured to work with low temperatures and during winter. The motor has an electric start and, therefore, is possible to connect it to your home electric line.

Specifications:

ORIGINAL Briggs&Stratton engine, 100% MADE IN USA.

The engine is winterized, which means that it is equipped with a special cover in order to protect the most breakable component parts subject to cold weather and to protect the engine in case of sudden drop in temperatures. Therefore, the engine is adapted for work in low temperatures. Winterized engines like this one aren't provided with air filter as, working in environments with low temperatures and snow, this last can create humidity that could freeze damaging the air filter and causing problems to the machine.

Focus on the black primer pump for an easy start.

Motor NOT PROVIDED WITH OIL.
Read the instructions manual carefully before using.

Nominal Power: 11.5 HP
The correct term would be "Commercial” Power, meaning the standard definition used until a few years ago by all well-known engine manufacturers.

* This technical feature is the one indicated in the main sales channels, even if it is higher than the real power of the engine.

Rated power: 7.57 HP (a rotation speed of 2800 rpm)
It corresponds to the real power of the crankshaft. This is the power indicated as official in the engine instructions manual.

* This technical feature may vary from a an engine model to another according to the rotation speed provided by the manufacturer.

Auger screw housing width of 76 cm and height of 54 cm.

The professional auger unit provided has an advanced and toothed steel auger unit. This structure is best suited to churn up even the thickest snow.

The shear bolts protect the auger gearbox.

Therefore, they react to stones or other obstacles by automatically unhooked from the gearbox.

Two-stage system

The snow is fed into the housing by the ribbon auger and is then discharged away through the discharge chute by a high-speed fan impeller with bars.

Aluminum reducer with steel auger gearbox in grease bath.

Adjustable plastic skid shoes
They allow working on any surface, from smooth to rough surfaces (adjust the working height by means of the skid shoes). It can also work over gravel surfaces. The advantage of the plastic skid shoes is that they do not scratch the ground surface.

The discharge chute is adjustable by means of a lever located in front of the main controls.

Also thedeflector which regulates expulsion distance can be controlled by means of the lever on the control panel.

Left-oriented discharge chute

Right-oriented discharge chute

Deflector located completely at the top for the maximum expulsion distance (up to 18 m)

Deflector located completely at the bottom.

The discharge chute is equipped with safety grid.

Drive speed control lever:
6 forward speed
2 reverse speed

Power-assisted steering system (small red lever)

It allows disconnecting the traction drive from the 2 wheels by means of its dedicated lever on the bottom.

It makes your snow blower easy to steer and maneuver.

Electric heated grips.
For more comfort while working.

Focus on the switches with mini-LED lights, for:
- headlights
- heated grips

Upper lever on the right side: it stops the forward and the reverse movement of the machine, independently from the selected speed. For safety reasons, the machine will stop automatically releasing the lever.

Upper lever on the left side: it controls the auger screw and the impeller fan (it controls both simultaneously).

Discharge chute control lever.

Powerful artificial LED headlights positioned on the panel.

Clean-out tool.
If the discharge chute is clogged, use the clean-out tool.

2 POSSIBLE CONFIGURATIONS:

Upper deflector:
it can feed snow inside the auger housing even when snowdrifts are higher than the housing and are very thick.

Side drift cutters:
they cut through very high and deep snowdrifts avoiding the snow on the side (cut by means of these blades) may fall again where the snow has been already cleared.

Tractor wheels for good traction, using motor’s horsepower.

Sizing: 16x 4.80 - 8