GreenBay Tipper-H 500 crawler dumper - Honda GX270 engine

The GreenBay TIPPER-H 500 dumper with hydraulic skip and 500 kg skip capacity is a vehicle designed to transport and unload heavy materials efficiently and easily.

It is an industrial vehicle used for transporting heavy materials in hard-to-access areas. It has a robust construction and tracks instead of wheels, which give it greater stability and grip on rough or muddy terrain.

The hydraulic skip is powered by a pump and cylinder system that allows the skip to be lifted and tilted to unload material. The container capacity of 500 kg makes it suitable for transporting medium-sized loads, such as sand, gravel, soil or waste.

A very sturdy frame and dumper body allow the transport of any type of material quickly and easily.

The absence of holes, within the container allows the transport of liquid materials without leakages.

The machine tracks allow it to move even over uneven and rough terrain.

The hydraulic system for lifting the dumper body of which this wheelbarrow is equipped with, facilitates at the maximum each working stage, eliminating the effort to raise the truck once loaded.

Honda GX270 engine 9 HP, 270 cc

The HONDA GX270 engine mounted on the power barrow guarantees excellent durability and reliability of the machine.

Remember that it is always a good idea to:
1) check the engine oil level
2) put oil in the filter because it is not present (in case of filter in oil bath)
3) carefully read the instructions manual before carrying out any oil check and topping up operation (the manufacturer can modify the supply modalities specified in the two upper points without any prior notice).

Honda GX 270 is a
super-professional, SUPER-POWERFUL and cutting-edge engine, which belongs to the latest overhead valve technology (OHV).

Features:

The Honda “GX” series is highly professional and was developed for heavy duty jobs in building and agricultural field for generators, welders etc., reliable and long life.

The HONDA engines belonging to the GX series stand out as the "TOP-QUALITY ENGINES ON THE MARKET”.

WARNING!

These machines are tested by the producer before being shipped. Therefore, the engine is already filled with oil at level and with a minimum amount of fuel in the tank. Gearbox oil already at level. However, as detailed stated on the Instructions manual, both engine and gearbox oils need to be always checked before starting the unit.
Make sure to carefully read the istructions before starting the unit.

Nominal Power: 9.0 HP

* The correct term would be "Commercial” Power, meaning the classic standard of definition of power officially used until a few years ago by all leading engine manufacturers. This technical feature is the one indicated in the main sales channels, even if it is higher than the real power of the engine.

Rated power: 6.2 HP

* It refers to the real power of the engine. This is the power indicated as official in the engine instructions manual.

Gearbox: large, reliable and precise.

Speed:
3 forward gears
1 reverse gear

Parking brakes:
connected to the gearbox, for greater stability and safety.
These are automatically engaged when the controls are released (leaving the machine in neutral position, even on a steep slope, the machine doesn’t move).

Transmission:
Sturdy and resistant, it allows steering by acting on the single track, disengaging its rotation..

The machine is supplied by the manufacturer with transmission oil level. However, oil levels must ALWAYS be checked before switching on as specified in the instruction and maintenance booklet.

The width and profile of the tread guarantee perfect grip and stability on all types of terrain.

Made of special reinforced rubber with excellent grip, they can tackle any type of surface or step.

Total track width: 95 cm

Thanks to the width and the tread configuration, they guarantee perfect grip and stability on all types of terrain.

Tracks made in high-density rubber to ensure a longer life and greater efficiency, with teeth designed to have a good adhesion on rough terrains, provided with 4 Rollers .

Focus on the rear part of the track with "tank shaped” sharp upper corner that allows the shredder to easily climb steps or other obstacles.

The sturdy frame with steel structure in high thickness which limits the vibrations and noise.

The low center of gravity also ensures an optimal stability during the work the position of the engine and the transmission facilitates maintenance

Adjusting the track tension thanks to the tension springs.

Barrow made in high-resistance steel, is reinforced with tubular cross members in the lower part, which make it suitable for any load or stress.

In addition, the body structure is completely welded and free of holes, making it watertight, which allows the transport of any material with a high liquid content.

The load floor is at the minimum distance from the ground both to facilitate the operations of loading / unloading that to keep low the center of gravity of the machine.

Caisson size: 950x680x465 mm

The mechanical tilting of the body is activated manually with the special rubber release lever placed on the side of the barrow.

User-friendly and ergonomic controls offering high control and precision during use.

Large red lever for motion engagement.

The two lower levers are for the steering, respectively right and left.

The steering can be adjusted depending on the control lever and it allows smooth moving. If either lever is partially pulled, the steering of the respective track, right or left, will also be partial.
This allows smoothly steering the power barrow.

Safety brake that allows immediately stop the machine.

Throttle lever and power switch

Hydraulic tipping