GreenBay Tipper-H 500 Dumper Tracked Power Barrow - BS XR1450 Engine - Hydraulic body

The GreenBay TIPPER-H 500 BS XR1450 power barrow is a robust and versatile machine designed for use in agriculture and construction.

A sturdy and versatile machine, designed for use in agriculture and construction.

A very sturdy frame and dumper body allow the transport of any type of material quickly and easily.

Being free of holes, the container allows the transport of liquid materials without leakage.

The machine tracks allow it to move even over uneven and rough terrain.

BS XR1450 engine 12 HP, 306 cc

The BS XR1450 engine with which the power barrow is equipped guarantees excellent longevity and reliability of the machine.

It provides stability and safety during use, even with heavy loads and slopes that standard power barrows cannot handle.

We remind that it is always good to:
1) check the engine oil level
2) put oil in the filter because it is not present (in case of filter in oil bath)
3) carefully read the instructions manual before carrying out any oil check and topping up operation (the manufacturer can modify the supply modalities specified in the two upper points without any prior notice).

The Briggs & Stratton 1450 XR Professional Series engine is a high-performance engine, suitable for work where great power is required thanks to its high displacement of 306 cc.

"Professional Series" means:

• High performance and extended life: average engine life over 3 times that of CR engines. * Compared to the expected life standards of the Briggs & Stratton CR Series engine.
• These engines are designed for frequent use in working environments.
• Forged crankshaft for extended engine life.

Features:

Brand new 4-stroke engine (overhead valve shaft OHV - recoil ignition ).

Easy re-coil start thanks to the automatic fuel priming system.

WARNING
The engine is PROVIDED WITHOUT OIL.
Make sure to carefully read the instructions manual before starting the unit.

Rated Power: 12 HP
The correct term would be "Commercial” Power, meaning the standard definition used until a few years ago by all well-known engine manufacturers.

* This technical feature is the one indicated in the main sales channels, even if it is higher than the real power of the engine.

Effective power: HP 10.0 (2600 rpm rotation speed)
It is the real power of the engine shaft. This is the power indicated as official in the engine instructions manual.

* This technical feature may vary from an engine model to another according to the speed of rotation provided.

Gearbox: Large, reliable and accurate.

Speeds:
3 forward gears
1 reverse gear

Parking brakes:
connected to the gearbox, for greater stability and security.
These are automatically activated when the controls are released (if the machine is left in neutral position, even on a steep slope, it remains perfectly locked).

Transmission:
Sturdy and resistant, it allows managing the steering by acting on the single track, deactivating its rotation.

With their width and tread profile they guarantee perfect grip and stability on all types of terrain.

Made of special reinforced rubber with excellent grip, they are able to tackle any type of surface or step.

Total track width: 95 cm

Thanks to the width and the tread configuration, they guarantee perfect grip and stability on all types of terrain.

Tracks made in high-density rubber to ensure a longer life and greater efficiency, with teeth designed to have a good adhesion on rough terrains, provided with 4 Rollers .

Rear side of the crawler track with a pointed 'tank-like' upper corner that allows it to climb steps or other obstacles with ease.

The robust frame with steel structure in high thickness which limits the vibrations and noise.

The low centre of gravity also ensures an optimal stability during the work the position of the engine and the transmission facilitates maintenance

Body made in high-resistance steel, is reinforced with tubular cross members in the lower part, which make it suitable for any load or stress.

In addition, the body structure is completely welded and free of holes, making it watertight, which allows the transport of any material with a high liquid content.

The load floor is at the minimum distance from the ground both to facilitate the operations of loading / unloading that to keep low the center of gravity of the machine.

Barrow dimensions 950x680x465 mm

Hydraulic tipping: activated with the lifting lever.

Controls: easy to operate and ergonomic, they offer precision and controllability in the work

Large red lever for motion activation.

The two lower levers are for the steering, respectively right and left.

The steering can be adjusted depending on the control lever and it allows moving smoothly. If either lever is partially pulled, the steering of the respective track, right or left, will also be partial.
This allows smoothly steering the power barrow.

Safety brake that allows immediately stop the machine.

Throttle lever and power switch