Heavy-duty Diesse DS84 Garden Tiller with Lombardini/Kohler 15LD440 Diesel Engine, Electric Start

This is a classic garden tiller model equipped with a powerful LOMBARDINI/KOHLER diesel engine with ELECTRIC START and a traditional sturdy gearbox in oil bath equipped with 3 forward gears and a reverse gear.

The Lombardini/Kohler engine supplied guarantees high efficiency and reliability. 100% Made in Italy The machine weighs 145 Kg, which is a definite plus as the weight helps with ground penetration.

This model is intended for large-sized land to till or hard ground or with the presence of small stones (where a smaller-sized, more lightweight garden tiller or equipped with a less sturdy transmission, such as belt-driven models would not be able to work as effectively).

The Lombardini/Kohler diesel engine provides excellent torque (higher than other petrol engines at low rpm), enabling the machine to work smoothly even in higher gears, allowing the tines to rotate at very high rpm without putting too much strain on the engine. In addition, it guarantees low consumption and, more generally, low maintenance requirements and low operating costs.

The Lombardini/Kohler KD15-440 441 cc engine with electric start is the best diesel engine on the world market today.

Due to its exceptional performance, it is the benchmark for agricultural machinery engines.

Its exceptional power of 10 Hp makes it the best engine in terms of reliability and performance.

Its main features are:

• ignition without kickback (it is the first diesel engine to have this innovation)
• starter rope with recoil system
• ignition with automatic decompressor
• quieter than traditional diesel engines
• extremely low consumption
• great steadiness, low vibration level

The company Lombardini, owner of the engines, was acquired by Kohler brand, so in new products the wording on the label may vary, however, the technical characteristics remain unchanged.

Nominal Power: 11 Hp
The correct term would be "Commercial” Power, meaning the standard definition used until a few years ago by all well-known engine manufacturers.

* This technical feature is the one indicated in the main sales channels, even if it is higher than the real power of the engine.

Rated power: 10 Hp
It corresponds to the real power delivered by the motor shaft. This is the power indicated as official in the engine instructions manual.

* This technical feature may vary from a an engine model to another according to the rotation speed provided by the manufacturer.

Features:

• Engine type: 4-stroke, single cylinder
• Cubic capacity: 441 cm³
• Max. rpm 3600 rpm
• Torque value: 22.5 Nm at 2100 rpm
• Power: 10 Hp

Quiet, smooth and with very low fuel consumption, the Lombardini/Kohler engine is a guarantee of reliability and durability.

Nowadays, the great majority of agricultural and gardening equipment available on the market are fitted with engines with unknown brands or motors Made in China.

The engine comes already supplied with the oil necessary for its correct operation.

Remember that it is always a good idea to:
1) check the engine oil level
2) put oil in the filter because it is not present (in case of filter in oil bath)
3) carefully read the instructions manual before carrying out any oil check and topping up type of operation (the manufacturer can modify the supply modalities specified in the two upper points without any prior notice).

The garden tiller is equipped with an electric start, with the key ignition switch panel placed directly between the steering handles.

The starter motor is supplied as standard.

The battery equipped as standard ensures perfect starter motor efficiency and a extremely fast start-up of the garden tiller.

The gearbox that comes with this garden tiller is large and sturdy.

It is undoubtedly the largest, strongest and most efficient transmission on the market today.

Its main features are:

• Overall size and sturdiness, also visually detectable
• Upper gear tempering
• Precise gear shifting engagement
• Accuracy in gear manufacturing

It features 3 forward gears and 1 reverse gear, which can be engaged by means of the lever on the control panel.

The power take-offs are easily accessible, located directly at the rear of the machine. Just remove the rubber stoppers to make them ready to work.

Normalised power take-off
(which is always rotating, even when the transmission is in the neutral position; this setting is ideal to operate additional equipment that can be attached to the power take-off)

Gearbox power take-off (useful for towing operations, for example by attaching a trolley with tracked wheels to the garden tiller, although it will not be compliant with the current road regulations)

The transmission is among the sturdiest on the market.

Equipped with pinion and crown gear in oil bath.

Sturdy tine mounted on an hexagonal-shaped central shaft, and provided with six elements with 4 steel rotary hoes each.

Effective tine working width with three cutters: 95 cm

Hexagonal shaft diameter: 30 mm.

Reduced width with 2 cutters: 70 cm

Maximum width with 4 cutters (optional): 120 cm

The tine mounted on this diesel garden tiller can be easily adjusted. Simply remove the 2 most external elements and fit the appropriate external crop protection discs.

The rear stake can be adjustable in height and can be positioned in rotating or fixed position.

The picture shows the stake mounted in standard position.

It can, for example, be assembled in the reverse position (with the bend turned to the front), to till harder or uncultivated ground.

The steering handles are height and laterally adjustable thanks to the double regulating lever system made of cast steel.

SAFETY DEVICE:

• Single safety device for forward gears (red switch-off lever)
• Double safety device for reverse gear (red lever + reverse gear disengagement lower right lever)

Throttle lever

Practical storage compartment placed on top of the key ignition switch panel.

Key ignition switch panel with oil indicator and battery.