Makita DUX18 Multi-tool Battery-powered Hedge Trimmer - 18 V 3Ah

This Makita DUX18Z battery-powered multi tool hedge trimmer allows you to comfortably operate without the bulk of an electric cable without giving up its advantages.

This multi tool battery-powered hedge trimmer is silent, lightweight and easy-to-use.

The product comes equipped with a 18 V 3Ah battery and a ONE-SLOT battery charger that can charge one battery at a time.

Variable speed control dial that allows the Operator to adjust the speed according to the attachment in use.

Electric safety brake for maximum safety during use.

Soft start for maximum Operator’s safety.

The attachments that can be mounted on the machine are many and intended for different purposes, allowing this brush cutter to be extremely versatile.

The hedge trimmer head is INCLUDED in the package.

The quick coupling allows the Operator to switch from one attachment to the another very easily and quickly.

The motor unit without battery and hedge trimmer head weights 5.8 Kg.

1 LITHIUM-ION BATTERY AND BATTERY CHARGER INCLUDED

Batteries equipped with quick release: the battery can be easily detached and pulled out from the machine by pressing the quick release button.

Voltage: 18 V
Amperage: 3Ah

The practical battery can be recharged at any time, no memory effect (it does not tend to run out after many refills), always a great power.

Convenient battery charger included (it connects to the home mains as the charger of a mobile phone).

The batteries are plugged to the battery charger through the quick release, in the same way as it is connected to the machine.

It is also possible to purchase additional batteries for ensuring a long running time.

Therefore, you only need one battery and one battery charger in order to be able to use the full range of equipment offered by Makita.

LONGER LIFE: up to 3 times higher than nickel–cadmium batteries, reducing the need to recharge during long periods of use.
Ideal for medium-large gardens.

FULL CHARGE FOR THE ENTIRE BATTERY LIFE: the charge of the lithium-ion batteries does not fade. Unlike nickel-cadmium batteries, which power gradually decreases, lithium-ion batteries’ cells maintain constant power throughout the entire cycle. The same charge for the entire cycle without reducing the motor speed. The battery is running at full power until its complete exhaustion.

LONGER CHARGE LIFE: lithium-Ion batteries last 3-4 times longer than traditional Nickel-Cadmium batteries and their power storage lasts longer so they lose less power. Lithium-ion batteries can be recharged up to 2000 times!

LIGHTWEIGHT: lithium-ion batteries have the best power-weight rate. They weigh 1/3 of nickel-cadmium ones.

ENVIRONMENTALLY-FRIENDLY: lithium-ion battery-powered tools are recyclable and are produced without heavy metals.

NO MEMORY EFFECT: lithium-ion batteries can be recharged at any time without negative memory effect. Indeed, they don't fail to provide maximum power even after hundreds of charge cycles.
Few minutes of charge are enough to complete the work.

LOW DISCHARGE RATE: low discharge rate (up to 5 times lower than nickel-cadmium batteries) so your machine will be ready to use even after months of storage.

BATTERY CHARGER: lithium-ion batteries chargers reduce energy consumption by an average of 35%.

Advantages of the electric motor:

• More reliable than a petrol model. No spark plug, filters, oil dipstick, carburettors, etc. or components which can cause problems.
• Zero maintenance
• Much lighter
• Lower consumption and drastically reduced operating costs compared to petrol engines (great results with minimal power required). Moreover, the Operator won’t have to refuel (the fuel should always be fresh).
• Zero vibrations, thanks to the electric motor. Instead, almost all engine-powered machines, which are not equipped with an anti-vibration system on steel springs, have a very high degree of vibrations, making the work quite unpleasant.
• Zero smoke emission, zero impact on the environment and, above all, on the Operator’s health.
• Much more silent and therefore pleasant to use than a petrol engine.

The transmission shaft of the brush cutter features a diameter of 24 mm and is made of aluminium. This makes it very long-lasting and lightweight at the same time.

- Ergonomic loop handle

Control dial for adjusting the operating speed according to the needs.

The control are easy and intuitive, allowing to select 2 electronic speeds.

Focus on the quick release.

This hedge trimmer attachment, that can be attached to the DUX18Z brush cutter, is the ideal tool for pruning high and deep hedges.

It is equipped with a 53 cm blade.

Focus on the 53 cm bar

It can be easily attached to the DUX18Z brush cutter thanks to its quick-release coupling.

It is easy to use by any Operator and can be tilted into 12 positions, making it very versatile.

The hedge trimmer can be adjusted according to the operations to carry out.

A plastic cutting bar cover is included.

The machine is equipped with: