Makita UR003GZ01 - Battery-powered Brush Cutter - 40V - WITHOUT BATTERIES AND CHARGERS

This Makita UR003GZ01 battery-powered brush cutter is suitable for large grass areas where you need maximum performance.

Equipped with many technologies, such as:

• AFT technology (Active Feedback-Sensing Technology), which turns off the motor if blade rotation is suddenly forced to stop.
• XPT protection technology provides improved water and dust resistance to also work in rough conditions.
• XGT® technology provides digital communication between the battery and the tool, so they are also ready to adapt to the jobs of the future. XGT® also provides greater durability and power, so the tool is also suitable for industrial applications.

It is a battery-powered brush cutter, silent, light and easy to use in narrow spaces thanks to its LOOP single handle.

The batteries developed by Makita are considered among the best performing in the world.

The maintenance-free brushless motor ensures long durability.

This machine has many advantages:

• no power cables
• zero emissions
• extremely silent
• handling and comfort

BATTERY AND BATTERY CHARGER NOT INCLUDED

LONGER LIFE: up to 3 times higher than the nickel–cadmium batteries, reducing the need to recharge during long periods of use.
Ideal for medium-large gardens.

FULL CHARGE FOR THE ENTIRE BATTERY LIFE: the charge of the lithium-ion batteries does not fade. Unlike nickel-cadmium batteries, which power gradually decreases, the cells of lithium-ion batteries maintain constant power throughout the entire cycle. The same charge for the entire cycle without reducing the motor speed. The battery runs at full
power until its complete exhaustion.

LONG BATTERY LIFE: lithium-ion batteries have 3-4 times the number of recharges compared to conventional nickel-cadmium batteries, while offering longer storage times and
less loss of charge. Lithium batteries can be recharged up to 2000 times!

LIGHTWEIGHT: Lithium-ion batteries have the best power-to-weight ratio. On average, they weigh on average 1/3 of nickel-cadmium batteries.

ENVIRONMENTALLY FRIENDLY: Lithium-ion battery-powered tools are recyclable and are produced without heavy metals.

NO MEMORY EFFECT: Lithium-ion batteries can be recharged at any time without negative memory effect. Indeed, they provide maximum power even after hundreds of charge cycles.
Few minutes of charge are enough to complete the work.

LOW DISCHARGE RATE: low discharge rate (up to 5 times lower than nickel-cadmium batteries) so your machine will be ready to use even after months of storage.

BATTERY CHARGER: battery chargers for lithium-ion batteries allow reducing the energy consumption by an average of 35%.

BATTERY AND BATTERY CHARGER NOT INCLUDED

Main advantages of the electric motor:

• More reliable than a petrol engine. It does not have a spark plug, filters, oil dipstick, carburettors or any component that may cause problems.
• Maintenance-free
• Much lighter
• Lower consumption and drastically reduced operating costs compared to petrol engines (great results with minimum power required). No need to constantly provide fuel (which should always be fresh).
• Zero vibrations. Instead, almost all engine-powered machines which are not equipped with an anti-vibration system on steel springs have very strong vibrations, making work quite unpleasant.
• Zero smoke emission, zero impact on the environment and, above all, on the operator’s health.
• Much more silent and therefore more pleasant to use than a petrol engine.

In addition, this brush cutter in particular is equipped with the Active System technology, a security system that instantly stop the rotation of the motor and transmission as soon as it will impact a solid object while using the steel blade. This will help prevent damage to the machine and especially the operator.

BATTERY AND BATTERY CHARGER NOT INCLUDED

The Tap'n Go line head allows to feed the line by pressing it against the ground during rotation. The adjustment of the line length is automatic thanks to the counter-blade on the stone guard.

The brush cutter also includes a head with plastic retractable blades and a 4-tooth disc with blade guard.

The stone guard also adapts to the steel blade without the need to replace it. Simply release the lower part of the stone guard to use it with ease and safety.

BATTERY AND BATTERY CHARGER NOT INCLUDED

The transmission shaft of the brush cutter has a diameter of 24 mm and it is made of aluminium. This makes it very durable while maintaining a low weight.

Ergonomic handle.

The controls are convenient, simple and intuitive, with 3 electronic speeds.

BATTERY AND BATTERY CHARGER NOT INCLUDED