Olive Harvester + Attila Multifunctional Brush Cutter with Honda GX 25 Engine

These petrol brush cutters are equipped with 4-stroke HONDA engines. These are the most advanced engines on the market.

This highly technological engine offers the following advantages:

• low consumption levels
• no fuel-related issues
• reduced polluting emissions
• less vibration
• lower noise levels

This multi tool brush cutter is ideal for all those situations that require the use of a tool apt at working not only as traditional brush cutter (with both disc and head),but also as pruner with chainsaw, hedge trimmer by replacing the attachment and as olive harvester.

It is very comfortable to use in narrow working spaces thanks to the single loop handle and the extreme manageability.

The comfortable extension pole included in standard equipment increases the working radius of each single attachement of 75 cm in order to reach up to 4 m working height (operator included).

Warning: these olive harvesters are not suitable for an intense use given its petrol engine. They are more heavy and hard to use with respect to the battery-powered models. Thus, in case of long daily use, we suggest to take into consideration the battery-powered olive harvesters.

However, the petrol engine of about 25/27 cc are more light, balanced and less demanding with respect to the models with 35 cc.
This is why we suggest to purchase the first ones.

The Honda GX 25 model is the best 4-stroke petrol engine. Besides being very reliable, this engine also features a series of innovating details that make it a range-leading model.

• It can be used at any angle
• It runs on petrol (it does not require preparing fuel-oil mix)
• Extremely low consumption and emission levels
• OHC configuration with an oil-lubricated belt (for reduced noise levels)
• It is made with high-quality durable materials

Specifications:

Compared with 2-stroke engines, this engine offers:

• polluting emissions: - 70% approx.
• consumptions: - 50% approx.
• noise levels: - 30% approx.
• vibration: - 40% approx.
• No more fuel issues!

Easy start thanks to the recoil start with cool ignition pump and air regulation

Detail of the air filter.

The Aima Zeus Universal olive harvester is an innovative harvesting comb (gull-wing shaped) that allows converting most petrol brush cutters into a powerful olive harvester with a minimal expense.

In fact, thanks to this modular pole fixing system the ZEUS universal shaker head is suitable for the main multi-tool products on market.

The ZEUS olive harvester is made of steel gears that are constantly lubricated. Moreover, thanks to an especially thin engine unit, the harvester allows easily entering into the foliage of the olive trees, almond trees or pistachios.

The harvesting comb is equipped with 5+5 carbon and kevlar prongs arranged in a gull-wing shape, particularly suitable for hard drupes.

Furthermore, the variable shape of the comb allows an even distribution of vibrations, resulting in good production without damaging the olive tree.

The Zeus olive shaker is suitable for harvesting the following olive tree types:

• Moraiolo
• Canino
• Olivastra
• Mignola
• Carboncella
• etc.

Made in Italy product

Assembling the olive harvester is easy as you’ll only have to follow this step:

1. Disassemble the bevel gear from the brush cutter tool
2. Remove the bevel gear
3. Assemble the supplied proper insert.
4. Fit the correct adapter insert for the transmission shaft cross-section.
5. Screw the shaft into the brush cutter attachment and tighten the locking screws.
6. The olive harvester tool is ready to use.

Warning:

This is only an assembly example. Only the olive harvester attachment is included in this advertisement. Please check the shape of your drive shaft before purchasing.

The aluminium shaft is extremely light and the fast coupling system for the various attachments is quick and easy. The operator simply has to tighten or loosen the knob and pull the tab to fasten it.

The ergonomic grip takes up very little space. All the controls are placed on this grip.

The single loop handle can be fixed in two positions on the shaft.

The supporting harness has to be fixed to the black ring[/x] next to the handle.

Standard supplied double antivibrating system (on the engine coupling and on the handle).

Internal transmission: sturdy with rigid shaft.

Straight shaft that can be disassembled at the centre for an easier transport. It takes up little space (easily storage in a boot).

The strimmer - brush cutter attachment is perfect for trimming operations and cutting grass, weeds, bushes and shrubs.

It can be used in difficult places that are hard to reach and work on.

Cutting width: up to 43 cm with the trimmer line and 25 cm with the disc blade.

Tap & Go head with automatic line feeding and a counterblade for line adjustment.

The line head can be replaced with a 3-tooth blade (supplied as standard equipment of this machine). The disc blade is suitable for challenging situations, (for example, when tackling small shrubs.)

WARNING: the brush cutter attachment is considered as SEMIPROFESSIONAL therefore it is suitable for a medium-intensive cutting task (not for challenging heavy-duty tasks).

The pruner attachment allows cutting up to 3 m high branches.

Half-transparent tank to quickly check the lubricating oil level without removing the plug.

The pruner features an Oregon bar and chain.

Focus on the chain tensioner.

Length of the pruning bar: 25 cm

Chain cover included in standard equipment.

WARNING: the pruner attachment can be considered as of HOBBYIST USE therefore it can be used for medium-low intense activities (moreover, we suggest you NOT to cut branches with diameters of more than 10-12 cm).

The hedge trimmer proves out to be extremely versatile thanks to the pole and the possibility of inclining the blades of 90° both right and left without using other working tools but simply pushing a lever.

Adjustable blades depending on the needs. It reaches 4 m working height with the pole assembled (operator included).

Length of the hedge trimmer blade: 40 cm

Distance between teeth: 25 mm

The hedge trimmer attachment is not suitable for intense and professional uses. The maximum cutting diameter is 10-12 mm (for thicker branches please consider hedge trimmers without extension pole, with a bigger and professional blade). It is not suitable to cut dry branches.

Blade cover included in standard equipment.

WARNING: the hedege trimmer attachment is apt for HOBBYIST USE, therefore it is not suitable for intense uses but just for finishings. The maximum cutting diameter is 10-12 mm (for thicker branches please consider a hedge trimmer without pole with big professional blade. Do not use it to cut dry branches).

Just remove one screw to apply the hedge trimmer attachment; however, we suggest not to use the hedge trimmer attachment with extension pole due to the high vibrations caused by excessive length. We therefore suggest to use it without the extension pole.

The extension pole can be exclusively applied to the following accessories:

• Prunerwith chainsaw
• Hedge trimmer with adjustable head

It can NOT be applied to the brush cutter attachment.

The extension pole increases 75 cm the working radius of the tools.

Also the extension shaft fits a quick connection.

WARNING:

Just remove one screw to apply the hedge trimmer attachment; however, we suggest not to use the hedge trimmer attachment with the extension shaft due to the high vibrations caused by the excessive length. Therefore, we suggest a use without the extension pole.