Mounted weed sprayer for medium and large crops.
Equipped with a modern low pressure BP 135 COMET pump, specific for weeding treatments.
Polyethylene full-emptying tank, with a capacity of 800L capacity
HEAVY PROFILE hot galvanised steel frame.
For weeding treatments and liquid fertilization with solutions.
The parts directly touching the liquid are made of plastic and plastic-coated aluminium, resistant to chemicals used in agriculture.
3-membrane Desmopan® configuration
Heads and manifolds made of cast aluminium.
Flow rate: 132.0 l/min
Pressure: 20.0 bar
This mounted weed sprayer unit has a 6-way constant pressure volumetric distributor.
VOLUMETRIC = maintains a perfectly constant liquid supply for each nozzle even when the pump speed varies or when the speed changes.
CONSTANT PRESSURE = maintains a perfectly constant pressure on each of the 6 outlets, so that every nozzle will deliver the same amount of liquid.
These two systems provide a distribution of the treatment as even and regular as possible, without waste, minimizing costs and reducing the damage on the environment.
Focus on the adjustable compensators (through a special upper wheel) with which each of the six outlets is equipped.
Pressure adjustment knob and Bypass lever that opens and closes the inflow of liquid to the boom.
Filter system fitted as standard which prevents the nozzles from becoming dirty or clogged.
Equipped with a special telescope arm with double adjustment, both horizontally and vertically.
This makes it possible to bring the unit closer to the tractor cab, so that you can operate the various controls directly from the driver's seat by simply turning around, without getting off the tractor.
- Vertical telescope regulator to adjust the height.
- Horizontal telescope regulator to approach the operator.
HEAVY PROFILE hot galvanised steel frame + three-point linkage to the tractor complete with pins.
This mounted weed sprayer is equipped with two special vertical bars specifically designed to mount any spraying device on the market, also allowing height adjustment in the desired position.
Perfect for applying any bar with hydraulic closure on the market by making two simple holes on it, or any bar lifting system, self-leveling device and so on...
Polyethylene full-emptying tank, capacity (L) 800.
Additional tank for hand washing
Circuit-washing tank (to wash the inside of the tank, hoses and all the equipment at the end of the treatment, before storage). To activate it, simply open the tap in the cartridge filter.
Focus on the external level with graduated scale.
Hydraulic agitator, to constantly mix the solution within the tank. It has a high-pressure jet in the centre of the tank.
External suction filter equipped with self-filling system (the hose to fill the tank must be purchased separately, you can find it in the related accessories section).