Zanon TSM Off-Road 1000 - ATV-mounted Trailed Rough Cut Mower - Honda GX390

The new Zanon TSM Off-Road 1000 rough cut mower is a multifunctional tool that can be used for grass and shrub cutting or, more simply, to scarify the soil and thus allow proper maintenance of the turf.

Its particular trailer hitch is designed for rear application on ATVs.

Thanks to a simple "folding crank handle" you can adjust the cutting height quickly and easily.

Maintenance is easier thanks to the adjustable chain tensioner and the convenient grease nipples.

This machinery is suitable for use in public spaces , such as lawns and sports areas, thanks to the safety equipment provided.

TECHNICAL SPECIFICATIONS (brief overview):

• Real working width: 100 cm
• Real operating width: 155 cm
• Weight: 155 kg
• HONDA 389 cc engine
• Recommended for tractors and ATVs
• Angular coupling for trailer hitch
• Double belt drive

FREE ITEMS PROVIDED ON STANDARD EQUIPMENT (short overview):

• Hammer blades
• Adjustable support foot
• Adjustable rear support roller
• 13X5.00-6 pneumatic wheels

WELL ADJUSTED WORKING HEIGHT (7 - 8 cm high)

The height of ATV rear trailer hitch can vary, so make sure to position the ATV so that its working position is sufficiently raised to prevent the cutting hammers from touching the ground.

The exact working height of the hammers from the ground is 7-8 cm minimum.

WARNING: frequent impacts of the hammers on the ground can lead to excessive wear of the lateral transmission belts or even their overheating or combustion, resulting in damage to the belts and the product.
We recommend that you pay attention to these circumstances of excessive product strain, as the overload noise coming from the machine may sometimes not be perceived by the operator riding the ATV due to the noise coming from the latter.

OPERATING SPEED:

a frequent mistake regards the product speed, mainly because of the high speed provided by the ATV.
This ATV-mounted petrol rough cut mower must be used at the same speeds as tractor-mounted rough cut mowers or smaller, hand-push petrol mowers.

Speed: from 1 km/h up to max. 4 km/h

In case of particularly tall grass, it is recommended not to exceed the speed of 1/1.5 km/h

In case of low and frequently cut grass, a speed closer to 4 km/h is acceptable

No. of hammers provided on standard: 40

These hammers are mounted on a sturdy bolt made of hardened steel of 12 mm diameter.

Close up of the cutting hammers that are already assembled on the rotating roller.

It is intended to finely shred grass and clippings, while rolling the grass cover and turf simultaneously. Thanks to the high number of rotor rpms and hammers (hammer blades), the wave effect on the grass is reduced, for an excellent cutting job.

Focus on the side supporting device with internal locking bearing of the hammer rotor.

Thanks to the hammer flails you will get great cutting results while working on gardens, lawns and urban areas. The machine can be attached to a motorized vehicle thanks to a trailer hitch.

Focus on the trailer hitch.

Lateral belt transmission:

Focus on the side belt protection casing with lateral grease nipple on the transmission side, conveniently placed and easy to access through the dedicated window.

The Honda GX390 engine is part of the GX series, designed for products used in fields such as agriculture or construction. Among the innovative features of this engine we find a facilitated start, a low level of consumption and a low level of vibrations.

The alternator is completely wrapped in copper.

ENGINE TECHNICAL DATA:

• ENGINE TYPE: HONDA GX 390
• DISPLACEMENT: 389 cc
• NOMINAL POWER: 13 hp
• STROKE: 4
• POWER SUPPLY: gasoline
• OIL CAPACITY: 1.1 L
• COOLING: air
• START: Recoil start with self recovery

Focus on air filter

Focus on the adjustment levers

Focus on the starter rope

OHV technology

The engine comes with an additional cord to be connected to the emergency shutdown system

The engine is PROVIDED WITHOUT OIL.
Please carefully read the instruction manual before starting.

Adjustable rear support roller provided on standard.

The cutting height is adjustable through a folding crank handle that raises and lowers the wheels and consequently the cutting roller.

Focus on the roller locking bearing

Focus on the roller barprovided with holes for the height adjustment. Height adjustable in 6 different positions.

Side support slide provided on standard and adjustable as well.

Sturdy series of front stone guards made of rubber.

Wide pneumatic wheels which allow the machine to easily walk on all terrains.

Focus on the adjustment of the coupling to the trailer hitch.

Throttle lever on the engine

Safety key