Wiper Blitz XH4 NIKO Robot Lawn Mower without Perimeter Wire - No Installation Required

Save the time for mowing your lawn with Wiper Blitz XH4 robot lawn mower without perimeter wire!

This machine is equipped with a lithium-ion battery and can work on areas up to 400 s.q. m.

Indeed, this robot has been designed to work without the need of a perimeter wire and it doesn’t require installation.

It requires no installation and it is equipped with many sensors:

• Step recognition sensor
• Eco Mode Sensor, which allows recognizing the area that has been already mowed:
• Lifting sensor
• Anti-tilting sensor
• Grass sensor
• Mechanical rear and front bumper

This robot lawn mower model, thanks to the traction on the 4 wheels, can manage inclined surfaces up to Max 40% slopes without loosing power or tip over.

Its sensors allow recognizing when the robot meets slops that exceed its capacity and address it in a different direction in order to avoid tilting or malfunctions. It will move in the same direction even in the event that is meets a slope ( higher than 25% ). The possible presence of trees whose trunks stand out gradually from the ground or similar objects are considered as lawn inclination.

It will be immediately ready for use! Indeed, the machine only recognizes and work on grassy surfaces. It autonomously changes the direction, working randomly without following specific guidelines and allowing the robot to work in areas up to 400 s.q. m.

The Wiper Blitz XH4 is a very silent machine and

it is equipped with a high-resistant steel blade mounted on a floating cutting deck, suitable for perfect cutting and edging. The cutting height can be adjusted from 15 mm to 45 mm, and

RECOMMENDED SURFACE: 400 s.q. m.

The interaction with your Wiper robotic lawn mower has never been so easy and fun.

Thanks to the free downloadable app you can take advantage of several additional features such as:

• Set the PIN code to use the robot in complete safety (only where required);
• Start and stop the robot
• Operate the robot lawn mower with a delayed start
• Control the robotic lawn mower during the mowing operations
• Change the status of the sensors
• View the status, alarms, and any possible errors of the robot

• The product is delivered ready to use and you can start it autonomously.

  Indeed, even the less expert user, who has never had experience with this kind of product, can start operating Wiper Blitz XH4 robot lawn mower without perimeter wire following the instructions explained in the user’s manual.

  The Operator will just need to place the robotic cutting device on the lawn that needs to be mowed, ensuring that the lawn is delimited by paved surface and / or barriers such as fences, walls, and so on.

  This robot lawn mower is ideal for every user.

  From now on:

  • You will be fully aware of the product you've purchased and have a thorough knowledge of its nature and features.
  • You will be able to use your robot lawn mower independently, without constant support from technical staff.
  • You will save time and money compared to other robotic lawn mowers.

This model must be used within an area bounded by walls, curbs, hedges or pavement as the sensors stop the machine only when it bumps into an obstacle, or when it runs into a 25 cm minimum deep pavement.

Easy and immediate battery charging thanks to the charging system that is hidden and protected by a IP21 panel, which is located in the upper section.

• It is recommended for surfaces up to 400 s.q. m.
• It can work in separated areas
• Grass recognition which allows adjusting the cutting power.
• (Blade modulation) this function allows adjusting the blade cutting speed depending on the effort that is met during the mowing operations: this ensures reduced consumptions, noise. In contrast, it allows increasing the cutting surface and the running time.
• Auto Programming
• Large wheels which don't ruin the lawn
• 4WD (which allows the robotic cutting device to work in gardens with high slopes)
• Transporting handles
• Exclusive step recognition sensors which save the robot in case of sudden gradients as steps or swimming pools.

• Max. inclination on slopes 40%
• Control panel with operating LED
• Very compact
• Speed: 18 m/min
• Anti-tilting sensor as standard
• Lift sensor as standard
• 6 recognition grass sensors as standard
• 7.5 Ah Lithium-ion battery
• Size: 48x37x23 cm
• Weight: 8,6 Kg

The Blitz XH4 robot lawn mower without perimeter wire is designed for perfectly cutting grass of any type of lawn. Thus, it works randomly without the need to follow specific guidelines.

It performs perfect and exceptional cutting between 42 mm and 48 mm (the cutting height can be set thanks to the standard-supplied spacer blade).

Four-tip blade ensures optimum results as it allows getting a regular and uniformal lawn shape.

Steel blade which leaves the grass clippings directly on the ground.

The mulching system allows distributing grass clippings evenly for a fertilized, healthy lawn.

Blade diameter: 25cm

The blade can be adjusted in two different heights:

42mm

48mm